Preparation of fused silica membrane with high performance for high temperature gas filtration by sealing and spray coating

In order to improve the gas permeability and thermal shock resistance of the ceramic membranes applied in high temperature gas-solid separation techniques, fused silica and graphite particles were used as the primary raw material and pore-former agent, and the spray coating based-on PVA sealing was applied to prepare the separation membrane. These approaches remarkably decreases filtration resistance by increasing support permeability and reducing the intrusion of ceramic membrane forming particles into the support as well as the thickness of the membrane. The fabricated membrane had an average pore diameter of 9.85?μm and a gas permeability value of 8.2?×?10⁴?m³/(m² h bar), its dust removal efficiency reached 98.6%.     

Effects of Nucleus Density and Dendritic Growth Influenced by Ti and Nb on Solidification Structure of Fe-18 Pct Cr Ferritic Stainless Steel

Metallurgical and Materials Transactions B - The effects of nucleus density and dendritic growth influenced by Ti and Nb on the solidification structure of Fe-18 pct Cr ferritic stainless steel...     

Axisymmetric hub-endwall profile optimization for a transonic fan to improve aerodynamic performance based on an integrated design optimization method

Structural and Multidisciplinary Optimization - This paper investigates an optimization for the axisymmetric hub-endwall profile of a transonic fan designed for a civil high bypass ratio turbofan...     

In situ characterization of LiY(WO4)2 nanotubes for electrochemical energy storage

Here, LiY(WO₄)₂ nanotubes are prepared via a feasible electrospinning technique. This new anode material shows excellent electrochemical properties. The capacity loss of LiY(WO₄)₂ nanotubes is as low as 6.9% after 156 cycles, while bulk LiY(WO₄)₂ presents the capacity loss higher than 55.0%. Even after 600 long-life cycles, the capacity loss of the nanotubes is only 9%. It can be seen that the hollow structure with a rough surface and a porous morphology contributes to the improvement of electrochemical performance. Furthermore, online X-ray diffraction (XRD) method is firstly applied to understand the lithium ions insertion/extraction mechanism of LiY(WO₄)₂ nanotubes. It can be concluded that it is an asymmetrical two-phase reaction. A phase transformation from LiY(WO₄)₂ to Li₃Y(WO₄)₂ can be obviously seen from the in situ XRD during discharge process. While Li₂Y(WO₄)₂ appears as an intermediate phase with a reverse charge reaction. In addition, in situ XRD also demonstrates that LiY(WO₄)₂ nanotubes have surprised electrochemical reversibility. All the above results indicate that LiY(WO₄)₂ nanotubes can be expected to be anode candidate for rechargeable lithium ion batteries (LIBs).     

Ni@N-doped graphene nanosheets and CNTs hybrids modified separator as efficient polysulfide barrier for high-performance lithium sulfur batteries

Lithium-sulfur batteries (LSBs) have been regarded as one of the most promising energy storage systems to break through the upper limit of lithium-ion batteries. However, the rampant diffusions of soluble lithium polysulfides (LiPSs) in the electrolyte induced the shuttle effect between anode and cathode, resulting in low sulfur utilization, low energy efficiency and short cycling life. Herein, we prove the rational design and construction of Ni nanoparticles filled in vertically grown N-doped bamboo-like carbon nanotubes (CNTs) on graphene nanosheets (Ni@NG-CNTs) as efficient polysulfide barrier for high-performance LSBs. The unique design integrates graphene nanosheets and CNTs into hierarchical architectures with one-dimensional (1D) CNTs, two-dimensional (2D) ultrathin nanosheets and abundant carbon nanocages. This design provides large surface area for lithium polysulfides (LiPSs) adsorption, accelerates electron transport and enhances electrochemical redox of LiPSs. Benefiting from the unique structural features, the LSBs with the Ni@NG-CNTs as polysulfide barrier keep high reversible specific capacities of 309.1 and 265.0 mAh·g⁻¹ at 5 and 10 C rates after 500 cycles. This work provides a new strategy for constructing self-assembled hybrids of CNTs and graphene nanosheets with abundant carbon nanocages for high-performance LSBs.

     

深圳抽水蓄能电站监控新技术应用研究与实践

通过对安防、工业电视和门禁等新技术的研究,设计了一套先进的监控系统,包括硬件平台、系统管理、应用软件,利用深圳抽水蓄能电站已形成的光纤网络通道把分布在方圆10 km范围内多个站端设备以环路的方式连接起来,把可靠成熟的新技术融合到整个平台。自首台机组成功投运,监控系统为电站正常运行保驾护航,高清摄像机、视觉识别、行为分析、边界防护等新技术的应用为工程项目增添了亮点,使电站现场管理更加智能化、规范化。     

LaCr0.7Fe0.3O3-NiMn2O4 supported NTC composite ceramics with a sandwich-like structure

A novel sandwich-like structure was first proposed to adjust the electrical properties of NTC thermistors. The LaCr_0.7Fe_0.3O₃-NiMn₂O₄ supported composite ceramics with sandwich-like structure were initially fabricated via traditional solid-state reaction and uniaxial pressing methods, which allowed for the advantages of each component to be integrated into one material. X-Ray diffraction analysis indicates the ceramics mainly consisting of orthorhombic perovskite LaCr_0.7Fe_0.3O₃ and cubic spinel NiMn₂O₄ phases. SEM images manifest that the three layers adhered well to each other and exhibited high density. For electrical properties, the ρ_25°C was expanded to a wide range of 1182–110,233 Ω?cm and could be adjusted to the desired values by tuning the volume ratio of two basic layers, the B value was enhanced from 3358 K to 4167 K by NiMn₂O₄, and the thermal stability was improved by LaCr_0.7Fe_0.3O₃ with a resistance shift less than 0.55 % after annealing at 150 °C for 1500 h.     

Synthesis of strontium (Sr) doped hydroxyapatite (HAp) nanorods for enhanced adsorption of Cr (VI) ions from wastewater

The development of high-efficiency adsorbents for heavy metal ion removal from wastewater is highly desirable and challenging due to their synthesis complexity and low adsorption capacities. Herein, we reported the synthesis of strontium (Sr) doped hydroxyapatite (HAp) for the increased Cr (VI) adsorption. The effects of pH, temperature, and time on adsorption performances were studied. As a result, the Sr-HAp nanorods can achieve a Cr (VI) adsorption capacity of 443 mg/g, which is significantly higher than that of HAp nanorods (318 mg/g). To better understand the adsorption mechanism, the Langmuir isotherm model was established. The modeling results indicated that Langmuir monolayer chemical adsorption contributed to the efficient Cr (VI) ion removal for Sr-HAp nanorods adsorbents. The surface area and surface functional groups (O–H) contributed to the different Cr (VI) adsorption capacities between HAp and Sr-HAp.